User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure Routing User Manual287
7. From the Route Type menu, select one of the following route types.
• DefaultRoute. Creates a default route.
You must specify the next hop address and
preference.
• Static. Creates a static route.
You must specify the network address, subnet mask,
next hop address, and preference.
Depending on the type of route that you are creating, specify the following information:
• In the Network Address field, specify the portion of the IP interface address that
identifies the attached network.
This is also referred to as the subnet/network mask.
• In the Next Hop IP
Address field, specify the outgoing router IP address to use when
forwarding traffic to the next router (if any) in the path toward the destination.
The next router is always one of the adjacent neighbors or the IP address of the local
interface for a directly attached network.
• In the Preference field, specify the preference, which is an integer value from 1
to 255.
You can specify the preference value (sometimes called administrative distance) of
an individual static route. Among routes to the same destination, the route with the
lowest preference value is the route entered into the forwarding database. By
specifying the preference of a static route, you control whether a static route is more
or less preferred than routes from dynamic routing protocols. The preference also
controls whether a static route is more or less preferred than other static routes to the
same destination.
• In the Description field, enter a description for the route.
The description must consist of alphanumeric, hyphen, or underscore characters and
can be up to 31 characters in length.
8. Click the Add button.
The static route is added to the switch.
9. Click the Apply button.
Your settings are saved.
10. T
o refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the nonconfigurable data that is displayed.
Table 63. Learned Routes information
Field Description
Network Address The IP route prefix for the destination.
Subnet Mask The portion of the IP interface address that identifies the attached network (also referred
to as the subnet or network mask).