User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure Routing User Manual276
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Routing> IPv6 >
Advanced > Neighbor T
able.
7. Use the Search menu and field to search for IPv6 routes by IPv6 address or interface
number:
• Search by IPv6 address. Select IPv6 Address from the Search menu. Enter the
128-byte hexadecimal IPv6 address in four-digit groups separated by colons, for
example, 2001:231F:::1.
Then click the
Go button.
If the address exists, the entry is displayed. An exact match is required.
• Search by Interface. Select Interface from the Search menu. Enter the interface
using the respective naming convention (for example, g1 or l1). Then click the Go
button.
If the address exists, the entry is displayed.
8. To clear the IPv6 neighbors on a selected interface or on all interfaces, click the Clear
button.
9. To refresh the page with the latest information about the switch, click the Refresh
button.
The following table describes the nonconfigurable data that is displayed.
Table 61. IPv6 Neighbor Table information
Field Description
Interface The interface whose settings are displayed in the current table row.
IPv6 Address The IPv6 address of the neighbor or interface.
MAC Address The MAC address associated with an interface.
isRtr Indicates whether the neighbor is a router. If the neighbor is a router, the
value is
T
rue. If the neighbor is not a router, the value is False.