User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure Switching User Manual247
10. From the Type menu, specify whether the port is an MVR receiver or an MVR source by
selecting receiver or a source.
The default port type is none.
11. From the Immediate Leave menu, specify whether the Immediate Leave feature is enabled
by selecting Enable or Disable.
The default is Disable.
12. Click the Apply button.
Your settings are saved.
13. T
o refresh the page with the latest information about the switch, click the Refresh button.
View the MVR statistics
To view the MVR statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 21 or Access the switch off-network and not
connected to the Internet on page 29.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 32.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 30.
5. Click the Go button.
The System Information page displays.
6. Select Switching > MVR >
Advanced > MVR Statistics.