User Manual

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Configure Switching User Manual186
7. In the Protocol Based Global Settings section, specify the following global settings:
a. From the Prioritization Type menu, select T
raffic Class or Remark.
This specifies the type of prioritization.
b. From the Class Value
menu, specify the CoS class value to be reassigned for packets
that the voice VLAN receives.
8. In the Protocol Based Global Settings section, specify the Auto V
oIP Mode settings:
a. Select whether to display physical interfaces, LAGs, or both by clicking one of the
following links above the table heading:
•1 (the unit ID of the switch). Only physical interfaces are displayed. This is the
default setting.
•
LAG. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
b. Select one or more interfaces by taking one of the following actions:
• T
o configure a single interface, select the check box associated with the port, or
type the port number in the
Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the
heading row
.
c. From the Auto VoIP Mode menu, select to enable or disable the
Auto VoIP mode
for the interface or interfaces.
9. Click the Apply button.
Your settings are saved.