Owner's Manual
Table Of Contents
- Smart Switch Software User Manual GS748T
- Contents
- About This Manual
- Chapter 1 Switch Management Overview
- Chapter 2 Using the Smartwizard Discovery Utility
- Chapter 3 Basic Web Management
- Chapter 4 Configuring the Switch
- Configuring Ports
- Configuring the Link Aggregation Group (LAG)
- Setting Up SNMP
- Configuring and Creating VLANs
- Enabling Spanning Tree Protocol
- Establishing Multicast Groups
- Enabling Jumbo Frames
- Setting Rate Limits
- Setting QoS Global Configuration
- Enabling Storm Control
- Configuring the IP Access List
- Controlling Switch Access by MAC Address and VLAN ID
- Setting up Mirroring or “Sniffer Ports”
- Viewing Packet Statistics
- Appendix A Specifications and Default Values
- Appendix B Virtual Local Area Networks (VLANs)
- Appendix C Network Cabling
Specifications and Default Values A-1
v1.0, October 2007
Appendix A
Specifications and Default Values
GS748T Smart Switch Specifications
The GS748T Smart Switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, 802.1D,
802.1p, and 802.1Q standards.
Table A-1. GS748T Smart Switch Specifications
Feature Value
Interfaces 48G (P01 - P48)
Fiber Optic 4 Mini-GBIC Combo (P45f - P48f)
PoE N/A
Flash Memory Size 2MB
SRAM Size and Type 16MB DDR
Table A-2. Switch Performance
Feature Value
Switching Capacity 48 x 1Gbps
Forwarding Method Store and Forward
Packet Forwarding Rate 10M:14,880 pps / 100M:148,809 pps / 1G:1,488,095
pps
MAC addresses 8K
Packet RAM buffer capacity 512K-bytes