Owner's Manual

GS700TPS Smart Switch Software Administration Manual
Managing System Settings 3-21
v1.0, June 2009
3. Select the Traps mode from the list in the provided field.
4. Click APPLY to update the device.
PoE Port Configuration
The PoE Port Configuration screen contains PoE class and power consumption information per
interface, while allowing the network manager to define the interface PoE Operation Status and
Priority Level.
1. Click System > PoE > Advanced > PoE Port Configuration. The PoE Port Configuration
screen displays:
The PoE Port Configuration screen contains the following fields:
• Interface – Displays the specific interface for which PoE parameters are defined. PoE
parameters are assigned to the powered device that is connected to the selected interface.
• Admin Mode – Select the device PoE mode. The possible field values are:
– Enabled – Enables the Device Discovery protocol and provides power to the powered
devices using the PoE module. The Device Discovery Protocol enables the device to
discover Powered Devices attached to the device interfaces and to learn their
classification. This is the default setting.
Figure 3-11