Owner's Manual

GS700TPS Smart Switch Software Administration Manual
3-20 Managing System Settings
v1.0, June 2009
To configure PoE on the device:
1. Click System > PoE > Advanced > PoE Configuration. The Advanced PoE Configuration
screen displays:
The Advanced PoE Configuration screen contains the following fields:
• Unit no. – Displays the stacking Unit no.
• Power Status – Displays the online power source status. The possible field values are:
– On – Indicates the power supply unit is functioning.
– Off – Indicates the power supply unit is not functioning.
– Faulty – Indicates the power supply unit is functioning, but an error has occurred. For
example, a power overload or a short circuit.
• Nominal Power – Displays the actual amount of power the device can supply. The field
value is displayed in Watts.
• Consumed Power – Displays the amount of the power used by the connecting devices.
The field value is displayed in Watts.
• System Usage Threshold – Enter the percentage of power consumed before an alarm is
generated. The field value is 1-99 percent. The default is 95 percent.
• Traps – Select the PoE device trap state. The possible field values are:
– Enable – Enables PoE traps on the device.
– Disable – Disables PoE traps on the device. This is the default value.
2. Enter the System Usage Threshold in the provided field.
Figure 3-10