Owner's Manual

GS700TPS Smart Switch Software Administration Manual
3-16 Managing System Settings
v1.0, June 2009
2. Select the Master Election mode.
3. If you selected Force Master, select either 1 or 2 from the stack list.
4. Click APPLY to update the device.
5. Reset the device for the new settings to take effect. See “Reset” for detailed instructions on
resetting the device.
Stack Management
The Stack Management screen allows network managers to assign specific Unit numbers to
stacking members or enable the software to automatically assign Unit numbers. Assignments take
effect after reset.
To configure Stack Management:
1. Click System > Stacking > Advanced > Stack Management. The Stack Management screen
displays:
The Stack Management screen contains the following fields:
• Unit No. – Displays the stacking member’s current Unit number. Possible values are 1-6.
• Unit No. After Reset – Select the stacking member’s Unit number after the device is
reset. The possible field values are:
– 1-6 – Assigns the selected Unit number to the stacking member after the device is
reset.
– Auto – Assigns the Unit number to the stacking member automatically after the device
is reset.
Figure 3-8