Owner's Manual

GS700TPS Smart Switch Software Administration Manual
3-8 Managing System Settings
v1.0, June 2009
• Short-Reach Reason — Displays the reason the port was not tested. Reasons may include that
the LinkType is not supported, that the Link Speed is not supported or that the Port Link is
down.
The possible field values are:
–LinkType — Indicates the LinkType is not supported.
–LinkUp — Indicates that a cable is not connected to the port.
• Cable Length — Displays the cable length tested.
Device View
The Device View menu displays the Device View screen, which provides a graphic representation
of the device, including the port and LED statuses.
To display the Device View screen:
1. Click System > Device View. The Device View screen displays:
Stacking
All stack members are accessed through a single IP address through which the stack is managed.
Stacks are managed using:
• A Web-based Interface
• An SNMP Management Station
The system supports up to six stacking members per stack to a maximum of 192 ports, or devices
can operate as standalone systems.
Figure 3-5