Owner's Manual

GS700TPS Smart Switch Software Administration Manual
Managing Security 6-16
v1.0, June 2009
To configure Storm Control:
1. Click Security > Traffic Control > Storm Control. The Storm Control screen displays:
The Storm Control screen contains the following fields:
• Interface – Displays the port number for which the storm control information is
displayed.
• Broadcast Control – Select whether storm control is enabled or disabled on the interface
according to Broadcast mode. The possible field values are:
– Enable – Enables storm control on the interface.
– Disable – Disables storm control on the interface.
• Broadcast Mode – Select the Broadcast control mode on the interface. The possible field
values are:
– Multicast & Broadcast & Unknown Unicast – Counts Broadcast, Multicast and
Unknown Unicast traffic together.
– Multicast & Broadcast – Counts Broadcast and Multicast traffic together.
Figure 6-9