Owner's Manual

GS700TPS Smart Switch Software Administration Manual
5-4 Configuring QoS
v1.0, June 2009
To configure CoS interface parameters:
1. Click QoS > CoS > Basic > CoS Interface Configuration. The CoS Interface Configuration
screen displays:
The CoS Interface Configuration screen contains the following fields:
• Interface – Displays the interface for which the default CoS parameters are defined.
• Default CoS – Select the default CoS value for incoming packets to the selected interface
for which a VLAN priority (VPT) is not defined.
• Restore Defaults – Restore the factory CoS default settings to the selected interface. The
possible field values are:
– Checked – Restores the factory CoS default settings to the ports.
– Unchecked – Maintains the current CoS settings.
2. Select the interface.
3. Select the Default CoS value from the list in the provided field in the first row.
Figure 5-2