Owner's Manual

GS700TPS Smart Switch Software Administration Manual
4-45 Configuring Switching Settings
v1.0, June 2009
The Basic IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
• IGMP Snooping Status – Select the IGMP Snooping status on the device. The possible
field values are:
– Disable – Disables IGMP Snooping on the device. This is the default value.
– Enable – Enables IGMP Snooping on the device.
Interface Settings
• VLAN ID – Displays the VLAN ID.
• Status – Select the IGMP Snooping status on the VLAN. The possible field values are:
– Enable – Enables IGMP Snooping on the VLAN.
– Disable – Disables IGMP Snooping on the VLAN.
2. Select the IGMP Snooping Status in the provided field.
3. Click APPLY to update the device.
To configure IGMP Snooping on a VLAN:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration.
The Basic IGMP
Snooping Configuration screen displays.
2. Select the VLAN ID entry in the Interface Settings table.
3. Select the Status from the list in the provided field in the first row.
4. Click APPLY to update the device.
Advanced
The Multicast Advanced menu contains the following options:
• “IGMP Snooping Configuration”
• “Multicast Group Configuration”
• “Multicast Group Membership”
• “Multicast Forward All”