Owner's Manual

GS700TPS Smart Switch Software Administration Manual
4-9 Configuring Switching Settings
v1.0, June 2009
LAG Configuration
The Advanced LAG Configuration screen contains fields for configuring LAG parameters. The
system supports 8 LAGs, and each LAG can contain up to 8 ports.
To define LAG parameters:
1. Click Switching > LAG > Advanced > LAG Configuration. The Advanced LAG
Configuration screen displays:
The Advanced LAG Configuration screen contains the following fields:
• Interface – Displays the LAG number.
• Description – Enter a user-defined LAG description.
• Status – Select the current link operation. The possible field values are:
– Up – Indicates the LAG is currently linked and forwarding traffic.
– Down – Indicates the LAG is currently not linked.
• Reactivate Suspended – Select the action to apply to a suspended LAG. The possible
field values are:
– Enable – Reactivates the suspended LAG.
– Disable – Does not reactivate the suspended LAG.
• Type – Displays the LAG Type. The possible field values are:
– Static – Indicates the LAG is configured manually.
– LACP – Indicates the LAG is configured automatically.
Figure 4-5