User Guide

Configure System Information
49
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
The Dynamic Host Configuration table shows host name-to-IP address entries that the switch
has learned. The following table describes the dynamic host fields:
Click Clear to delete dynamic host entries. The table will be repopulated with entries as they
are learned.
Configure and View Host Name-to-IP Address Information
Use this screen to manually map host names to IP addresses or to view dynamic DNS
mappings.
 To add a static entry to the local DNS table:
1. Select System > Management > DNS > Host Configuration.
2. In the Host Name field, specify the static host name to add.
3. In the IPv4/IPv6 Address field, specify the IP address to associate with the host name.
4. Click the Add button.
 To remove an entry from the static DNS table:
1. Select the check box next to the entry to remove.
2. Click the Delete button.
 To change the host name or IP address in an entry:
1. Select the check box next to the entry to update.
2. Enter the new information in the appropriate field.
3. Click the Apply button.
Table 8. Dynamically learned host name mapping information
Field Description
Host Lists the host name you assign to the specified IP address.
Total Amount of time since the dynamic entry was first added to the table.
Elapsed Amount of time since the dynamic entry was last updated.
Type The type of the dynamic entry.
Addresses Lists the IP address associated with the host name.