User Guide

Configure System Information
37
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
The following table describes the status information the System Information screen displays.
IP Configuration
Use the IP Configuration screen to configure network information for the management
interface, which is the logical interface used for in-band connectivity with the switch through
any of the switch’s front-panel ports. The configuration parameters associated with the
switch’s network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.
 To configure the network information for the management interface:
1. Select System > Management > IP Configuration.
2. Select the appropriate radio button to determine how to configure the network information for
the switch management interface:
• Dynamic IP Address (DHCP). Specifies that the switch must obtain the IP address
through a DHCP server.
• Dynamic IP Address (BOOTP). Specifies that the switch must obtain the IP address
through a BootP server.
• Static IP Address. Specifies that the IP address, subnet mask, and default gateway
must be manually configured. Enter this information in the fields below this radio
button.
Table 4. System Information screen status fields
Field Description
Product Name The product name that describes the switch.
Serial Number The serial number of the switch.
System Object ID The base object ID for the switch's enterprise MIB.
Date & Time The current date and time.
System Up Time The number of days, hours, and minutes since the last system
restart.
Base MAC Address The universally assigned network address.
Fan Status The screen shows the status of the fans. These fans remove the heat
generated by the power, CPU and other chipsets, make chipsets
work normally. Fan status has three possible values: OK, Failure, Not
Present.
Model Name The model name of the switch.
Boot Version The boot code version of the switch.
Software Version The software version of the switch.