User Guide

Maintenance
248
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
Factory Default
Use the Factory Default screen to reset the system configuration to the factory default values.
Note: If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see Connect the Switch to the Network on page 12.
 To reset the switch to the factory default settings:
1. Select Maintenance > Reset > Factory Default.
2. Select the check box on the screen.
3. Click the Apply button.
The switch resets immediately.
Upload
The switch supports system file uploads from the switch to a remote system by using either
TFTP or HTTP.
The Upload menu contains links to the features described in the following sections.
• TFTP File Upload
• HTTP File Upload