Manualshelf

User Guide

ManualsBrandsNETGEAR ManualsComputers & AccessoriesNETGEAR GS748T-500NAS 48-Port Gigabit Ethernet Smart Managed Pro Switch, 4 SFP, ProSAFE Lifetime Protection (GS748T)
221222223224225226227228229230
Managing Device Security
225
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
IP Binding Table
Use the IP Binding Table screen to view or delete the IP ACL bindings.
The following table describes the information displayed in the IP binding table.
To delete an IP ACL binding:
1. Select Security > ACL > Advanced > Binding Table.
2. Select the check box associated with the ACL-to-interface binding to remove.
3. Click the Delete button.
VLAN Binding Table
Use the VLAN binding table screen to associate an ACL with a VLAN. When an ACL is
associated with a VLAN, it is applied to all interfaces that are members of the VLAN.
To configure an ACL-to-VLAN binding:
1. Select Security > ACL > Advanced > Vlan Binding Table.
2. In the VLAN ID field, specify a VLAN ID for ACL mapping.
3. In the Direction field, select In Bound.
The IP ACL rules are applied to traffic entering the port.
4. (Optionally) In the Sequence Number field, specify the sequence number of the access lists.
This sequence number indicates the order of this access list relative to other access lists
already assigned to this VLAN and direction. A lower number indicates higher
precedence order. If a sequence number is already in use for this VLAN and direction, the
specified access list replaces the currently attached access list using that sequence
number. If the sequence number is not specified by the user (i.e., the value is 0), a
sequence number that is one greater than the highest sequence number currently in use
for this VLAN and direction will be used. Valid range is (1 to 4294967295).
Table 69. IP binding table information
Field Description
Interface The interface to which the IP ACL is bound.
Direction Specifies the packet filtering direction for ACL. The only valid direction is Inbound,
which means the IP ACL rules are applied to traffic entering the port.
ACL Type The type of ACL assigned to selected interface and direction.
ACL ID The ACL Number identifying the ACL assigned to selected interface and direction.
Seq No. The Sequence Number signifying the order of specified ACL relative to other ACLs
assigned to selected interface and direction.