User Guide

Configuring Routing
158
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches
ARP Cache
Use the ARP Cache screen to view entries in the ARP table, a table of the remote
connections most recently seen by this switch.
To display entries in the ARP table, select Routing > ARP > Basic > ARP Cache.
The following table provides information included in the management VLAN ARP cache
section.
The following table provides information included in the routing VLANs ARP cache section.
Table 54. ARP cache information
Field Description
IP Address The associated IP address of a device on a subnet attached to one of
the switch's existing routing interfaces.
Port Shows the associated interface of the connection.
MAC Address The MAC address of the device.
Table 55. ARP cache information for routing VLANs
Field Description
Interface The routing interface associated with the ARP entry.
IP Address The associated IP address of a device on a subnet attached to one of the
switch's existing routing interfaces.
MAC Address The unicast MAC address of the device.
Type The type of the ARP entry. Possible values are:
• Local. An ARP entry associated with one of the switch’s routing
interface’s MAC addresses.
• Gateway. A dynamic ARP entry whose IP address is that of a router.
• Static. An ARP entry configured by the user.
• Dynamic. An ARP entry which has been learned by the router.
Age Age since the entry was last refreshed in the ARP Table. The format is
hh:mm:ss.