Manualshelf

Software Administration Manual

ManualsBrandsNETGEAR ManualsNetwork RouterGS728TPP
919293949596979899100
Configuring Switching Information
96
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Table 15. MSTP Status Information.
Field Description
MST ID Table consisting of the MST instances (including the CST) and the
corresponding VLAN IDs associated with each of them.
VID Table consisting of the VLAN IDs and the corresponding FID associated with
each of them.
FID Table consisting of the FIDs and the corresponding VLAN IDs associated
with each of them.
CST Port Configuration
Use the CST Port Configuration screen to configure Common Spanning Tree (CST) and
Internal Spanning Tree on a specific port on the switch.
To configure CST port settings:
1. Select Switching
STP Advanced CST Port Configuration.
The following screen displays:
2. To configure CST settings for an interface, click PORTS, LAGS, or All.
3. Select the check box next to the port or LAG to configure.
You can select multiple ports and LAGs to apply the same settings to the selected
interfaces. Select the check box in the heading row to apply the same settings to all
interfaces.
4. Configure the CST values for the selected ports or LAGs: