Software Administration Manual

Configuring System Information
60
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
• User Priority. The priority associated with the policy.
• DSCP.
The DSCP associated with a particular policy type.
LLDP-MED Port Settings
Use this screen to enable LLDP-MED mode on an interface and configure its properties.
 To configure LLDP-MED settings for a port:
1. Select System
 LLDP  Advanced  LLDP-MED Port Settings.
The following screen displays:
2. From the Port list, select the port to configure.
3. From the LLDP-MED Status list, enable or disable the LLDP-MED mode for the selected
interface.
4. From the Notification list, select Enable or Disable to specify whether the port must send a
topology change notification if a device is connected or removed.
5. From the
Transmit Optional TLVs list, select Enable or Disable to specify whether the port
must transmit optional type length values (TLVs) in the LLDP PDU frames.
If enabled, the following LLDP-MED TLVs are transmitted:
• MED Capabilities
• Network Policy
• Location Identification
• Extended Power via MDI: PSE
• Extended Power via MDI: PD