Software Administration Manual

Configuring System Information
59
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
• Optional TLVs. Enable or disable the transmission of optional type-length value (TLV)
information from the interface. The TLV information includes the system name,
system description, system capabilities, and port description. For information about
how to configure the system name, see Management on page 26. For information
about how to configure the port description, see Ports on page 74.
4. Click APPL
Y to apply the new settings to the system.
LLDP-MED Network Policy
This screen displays information about the LLPD-MED network policy TLV transmitted in the
LLDP frames on the selected local interface.
 To view LLPD-MED information:
1. Select System
 LLDP  Advanced  LLDP-MED Network Policy.
The following screen displays:
2. From the Interface menu, select the interface for which you want to view information.
The following LLDP-MED network policy information displays:
• Network Policy Number.
The policy number.
• Application.
The media application type associated with the policy. Only the Voice
application type is supported. The application type that is received on the interface
has the VLAN ID, priority, DSCP, tagged bit status, and unknown bit status. This
information is displayed only if a network policy TLV has been transmitted.
• VLAN ID.
The VLAN ID associated with the policy.
• VLAN T
ype. Specifies whether the VLAN associated with the policy is tagged or
untagged.