Software Administration Manual

Configuring System Information
57
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
Note: You can also access the LLDP Configuration screen by selecting
System > LLDP > Advanced > LLDP Configuration.
2. Configure the following LLDP settings:
• TL
V Advertised Interval. Specify the interval at which frames are transmitted. The
default is 30 seconds, and the valid range is 5–32768 seconds.
• Hold Multiplier. Specify multiplier on the transmit interval to assign to
Time-to-Live
(TTL). The default is 4, and the range is 2–10.
• Reinitializing Delay. Specify the delay before a reinitialization.
The default is 2
seconds, and the range is 1–10 seconds.
• T
ransmit Delay. Specify the interval for the transmission of notifications. The default
is 5 seconds, and the range is 5–3600 seconds.
3. T
o change the LLDP-MED properties in the Fast Start Duration field, specify the number of
LLDP packets sent when the LLDP-MED Fast Start mechanism is initialized.
This occurs when a new endpoint device links with the LLDP-MED network connectivity
device.
The default value is 3, and the range is from 1–10.
4. Click APPLY.
Configuration changes take effect immediately.