Software Administration Manual

Configuring System Information
45
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The PoE Configuration screen displays the fields described below:
Table 8. PoE Configuration Information
Field Description
Power Status Indicates whether the PoE capability is on or off.
Nominal Power Indicates the maximum amount of power the switch can provide to all ports.
Threshold Power Indicates a power threshold percentage. In order to give power to an
additional port, the consumed power must be below the threshold.
Consumed Power Displays the amount of power the system can consume before the system
does not provide power to an additional port.
 To configure PoE traps:
1. Select System > PoE > Basic > PoE Configuration.
The following screen displays:
2. Select the appropriate radio button to enable or disable traps.
Click APPL
Y to apply the new setting to the system.
Note: You can also access the PoE Configuration screen by selecting System 
PoE  Advanced  PoE Configuration.