Software Administration Manual

Configuring System Information

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

The following screen displays:

2. View or configure the Local Device Information:

• Interface. The interface to be displayed or configured.

• Energy Detect Admin Mode. Select Enable or Disable.

• Operational Status. Displays the Energy Detect operational status, either Active or

Inactive.

• Reason. Displays the Admin status, either Admin Down or Admin Up.

• Short Reach Admin Mode. Select Enable or Disable.

• Operational Status. Displays the Short Reach operational status of the port, either

Active or Inactive.

• Reason. Displays the reason why the port is either Active or Inactive.

• EEE Admin Mode. Select Enable or Disable.

• Tw_sys_tx (uSec). Displays the amount of time the Tx_sys_tx has been present on

the port.

• Tw_sys_tx Echo (uSec). Displays the amount of time the Tw_sys_tx Echo has been

present on the port.

• Tw_sys_rx (uSec). Displays the amount of time the Tw_sys_rx has been present on

the port.

• Tw_sys_rx Echo (uSec). Displays the amount of time the Tw_sys_rx Echo has been

present on the port.

3. View the Remote Device Information:

• Interface. If local interfaces are enabled to receive LLDP data, this feature allows you

to select the remote device and retrieve port information.

• Remote ID. Displays the remote port identifier.