Software Administration Manual

Configure Quality of Service
151
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. Enter the new class name.
3. Select the class type, and click Add.
The switch supports only the Class Type value All, which means all the various match
criteria defined for the class must be satisfied for a packet match.
All signifies the logical
AND of all the match criteria.
4. Click APPL
Y to save the class. Configuration changes take effect immediately.
5. T
o configure this class, proceed to To configure an IPv6 class: on page 150.
 To configure the class match criteria:
1. In the IPv6 Class Configuration screen, select the name of the class.