Quick Start Manual
12
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
• Recessed Factory Defaults button to restore the device back to the factory defaults.
• Select button to change the working mode of the port LEDs with either PoE mode or
Ethernet mode.
• Port Status and Port Speed LEDs.
• Power
, Fan Status, Max PoE, and LED Mode LEDs.
Figure 5 illustrates the NETGEAR GS728TPP Gigabit Smart Switch back panel.
Power connector
Figure 5. Back panel
The back panel contains a power connector.
GS728TPP Front Panel and Back Panel Configuration
The GS728TPP Gigabit Smart Switch has 24 10/100/1000 Mbps copper ports and four
dedicated 100/1000 Mbps SFP fiber ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 6 illustrates the front panel of the GS728TPP Gigabit Smart Switch.
Power, Fan, PoE Max,
Link/ACT LEDs
SFP ports
Reset button
and LED Mode LEDs
Factory
Defaults button
Figure 6. Front panel