Quick Start Manual
11
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch
Figure 3 illustrates the NETGEAR GS752TP Gigabit Smart Switch back panel.
Power connector
Figure 3. Back panel
The back panel contains a power connector.
GS728TP Front Panel and Back Panel Configuration
The GS728TP Gigabit Smart Switch has 24 10/100/1000 Mbps copper ports and four
dedicated 100/1000 Mbps SFP fiber ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
Figure 4 illustrates the front panel of the GS728TP Gigabit Smart Switch.
Power, Fan, PoE Max,
Link/ACT LEDs
SFP ports
Reset button
and LED Mode LEDs
Factory
Defaults button
Figure 4. Front panel
The front panel contains the following:
• 24 RJ-45 connectors for 10/100/1000 Mbps
AutoSensing Gigabit Ethernet switching
ports.
• Ports 1–8 are PoE+ (30W) capable; ports 9–24 are PoE (15.4W) capable.
• Four dedicated 100M/1000 Mbps SFP Gigabit Ethernet switching ports.
• Reset button to restart the device.