User Guide

make a configuration backup before completing this step.
Note: This does not apply to unmanaged switches.
Further Considerations
 If your PoE switch model is GS105PE, then refer
to https://kb.netgear.com/25541/GS105PE-PoE-troubleshooting for guidance specific to
this device.
 If you see symptoms where you cannot power more than one PD in a set of adjacent
ports, such as scenarios outlined below, please contact NETGEAR Support. When
contacting Support, it may be beneficial to reference the troubleshooting you have
already carried out as described in this article.
o On a switch with greater than 16 ports, a PD on Port 1 powers on but a PD on
ports 2, 3 & 4 does not power on. Similarly, a PD on port 5 powers on but a PD
on ports 6, 7 & 8 does not power on.
o On a switch with 16 ports or less, a PD on Port 1 powers on but a PD on Port 2
does not power on. Similarly, a PD on Port 3 powers on but a PD on Port 4 does
not power on.