User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual80
7. Select the Disable or Enable radio button to specify whether to disable or enable the
administrative status of the DNS client.
• Enable.
Allow the switch to send DNS queries to a DNS server to resolve a DNS
domain name.
The DNS is enabled by default.
• Disable. Prevent the switch from sending DNS queries.
8. In
the DNS Default
Name field, enter the default DNS domain name to include in DNS
queries.
When the system is performing a lookup on an unqualified host name, this field is
provides the domain name (for example, if default domain name is netgear.com and the
user enters
test, then test is changed to test.netgear.com to resolve the name). The name
must not be longer than 255 characters.
9. In the DNS Server field,
specify the IPv4 address to which the switch sends DNS queries.
10. Click the Add
button.
The server is added to the list. You can specify up to eight DNS servers. The Preference
field displays the server preference order.
The preference is set in the order in which
preferences were entered.
11. To remove a DNS server from the list, select its check box and click the Delete
button.
If you click the Delete button without selecting a DNS server, all the DNS servers are
deleted.
12. Click the Apply
button.
Your settings are saved.
13. To refresh the page, click the Refresh
button.