User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual61
For information about the credentials, see Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select System > Management
> Time > Time Configuration.
7. Select the Clock Source Local radio button.
8. In the Date
field, specify the current date by entering the month, day, and year
(MM/DD/YYYY).
9. In the Time field, specify the current time by entering in hours, minutes, and seconds
(HH:MM:SS).
Note: If you
do not enter a date and time, the switch calculates the date and
time using the CPU’s clock cycle.
10. In
the Time Zone Name field, specify the acronym for a time zone.
Y
ou can also specify the number of hours and number of minutes that the time zone is
different from the Coordinated Universal Time (UTC). The time zone can af
fect the
display of the current system time. The default value is UTC.
Note: When
using SNTP/NTP
time servers to update the switch’s clock, the
time data received from the server is based on the UTC, which is the
same as Greenwich Mean Time (GMT). This might not be the time
zone in which the switch is located.
11. In the Offset Hours field, specify the number of hours that the time zone is dif
ferent from the
UTC.
For more information see the description for T
ime Zone Name in
Step 10. The allowed
range is –12 to 13. The default value is 0.
12. In the Offset Minutes field, specify the number of minutes that the time zone is different
from UTC.
For more information see the description for Time Zone Name in
Step 10. The allowed
range is 0 to 59. The default value is 0.
13. Click the Apply button.
Your settings are saved.