User Manual

Table Of Contents

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Configure System Information User Manual60

Configure the time settings

The switch supports the Simple Network Time Protocol (SNTP). As its name suggests, it is a

less complicated version of Network Time Protocol, which is a system for synchronizing the

clocks of networked computer systems, primarily when data transfer is handled through the

Internet. You can also set the system time manually.

Configure the time settings manually

You can view and adjust the date and time settings.

To manually configure the time setting:

1. Connect your

computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ether

net cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page 19 or Access the switch off-network and not

connected to the Internet on page 27.

The Device UI login page displays.

If you did not yet activate your warranty, the Register to activate your warranty page

displays. For more information, see

4. Enter one of the following passwords:

• After registration, enter the device admin password.

• If you previously managed the switch through the Insight app or

Cloud portal, enter

the Insight network password for the last Insight network location.

Neighbor State The state of the neighboring switch:

• reachable (1). The

neighbor is reachable by this switch.

• stale (2). Information about the neighbor is scheduled for deletion.

• delay (3). No information was received from the neighbor during

the delay period.

• probe (4). The switch is attempting to probe for this neighbor.

• unknown (5). Unknown status.

Last Updated The last sysUpTime that this neighbor was updated.

Table 6. IPv6 network interface neighbor table information (continued)

Field Description