User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual45
log in to the switch, see Access the switch on-network and connected to the Internet on
page 19 or Access the switch off-network and not connected to the Internet on page 27.
To configure a single port by using the Go To Interface field:
1. Ensure that the
page is displaying all ports, and not only the LAGs.
2. In the Go T
o Interface field, type the port number, for example g3.
For more information, see
Configure interface settings on page 44.
3. Click the Go
button.
The check box associated with the interface is selected, the row for the
selected interface
is highlighted, and the interface number appears in the heading row.
4. Configure the desired settings.
5. Click the Apply
button.
Your settings are saved.
To configure a single LAG by using the Go To Interface field:
1. Click the LAG
link or the All link to display the LAGs.
2. In the Go T
o Interface field, type the LAG number, for example l3.
For information, see
Configure interface settings on page 44.
3. Click the Go
button.
The check box associated with the interface is selected, the row for the
selected interface
is highlighted, and the interface number appears in the heading row.
4. Configure the desired settings.
5. Click the Apply
button.
Your settings are saved.
To configure a single port:
1. Ensure that the
page is displaying all ports, and not only the LAGs.
2. Select the check box next to the port number.