User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual41
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select System > Device
View.
The following table describes the system LEDs in the Device View.
System LED Color Description
Power LED Solid green Power is supplied to the switch and the switch is operating normally.
Fan LED Off The internal fan is operating normally
Solid yellow The internal fan failed.
PoE Max LED Of
f Sufficient (more than 7W of) PoE power is available on the switch
Solid yellow Less than 7W of PoE power is available on the switch.
For each Ethernet port and for the two SFP fiber ports in the Device view, colors indicate
the link status of the port. In addition, each Ethernet port also provides two port LEDs,
which are located on the left. For each port, an upper port LED indicates the port speed
status and a lower port LED indicates the port PoE status.
Note: The physical Power LED on the switch can also light solid amber.
Solid amber does not apply to the Device View. (If the switch is off or
booting, you cannot access the Device View.)
Note: In this situation, the physical Fan LED on the switch lights solid
amber rather than yellow.
Note: In this situation, the physical PoE Max LED on the switch lights
solid amber rather than yellow.
Note: The physical PoE Max LED on the switch can also blink amber,
indicating that at least once during the previous two minutes, less than
7W of PoE power was available.