User Manual

Table Of Contents

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Maintain or Troubleshoot the Switch User Manual380

Export a file from the switch

You can export configuration (ASCII) or log (ASCII log) files from the switch to a file server by

using TFTP or to a computer by using HTTP.

Use TFTP to export a file from the switch to a TFTP server

You can upload (export) configuration (ASCII or log ASCII) files from the switch to a TFTP

server on the network.

To export a file from the switch to a TFTP server:

1. Connect your

computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ether

net cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page 19 or Access the switch off-network and not

connected to the Internet on page 27.

The Device UI login page displays.

If you did not yet activate your warranty, the Register to activate your warranty page

displays. For more information, see

4. Enter one of the following passwords:

• Enter your device admin password.

• If you previously managed the switch through the Insight app or

Cloud portal, enter

the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the device UI on page 28.

5. Click the Go

button.

The System Information page displays.

6. Select Maintenance >

Export > TFTP File Export.