User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual38
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select the Directly
Connect to Web Browser Interface radio button.
An Alert pop-up window displays.
7. Read the text, and click the OK
button.
The pop-up window closes.
8. Click the Apply
button.
Another pop-up window displays.
9. Click the OK
button.
The pop-up window closes, the System Information page closes, and your settings are
saved. Any current Insight-manageable device settings are saved
to the cloud server.
The Device UI login page displays.
10. Log in again.
The System Information page displays.
Note: The following step uses an HTTP session to back up the configur
ation.
For information about using a TFTP session, see
Use TFTP to export a
file from the switch to a TFTP server on page 380.
11. Back up the configuration:
a. Select
Maintenance > Export > HTTP File Export.
The HTTP File Export page displays.
b. From
the File
Type menu, select Text Configuration.
c. Click the Apply
button.