User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Maintain or Troubleshoot the Switch User Manual376
Reboot the switch
You can reboot the switch from the device UI.
However, if you can physically access the switch, you can reboot the switch by pressing a
button on the front panel:
• Model GS724TPv2. Press the single-function Reset button for more than one second.
• Model GS724TPP.
Press
the multi-function Reset button for less than 5 seconds. (Do not
press the button for more than 5 seconds!)
To reboot the switch from the device UI:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Maintenance >
Reset > Device Reboot.
The Device Reboot page displays.
7. Select the check box.
8. Click the Apply
button.
An Alert pop-up window displays.
9. Click the OK
button to confirm.
The switch reboots.