User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual34
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Register to activate your warranty page displays.
4. Click the Skip
Registration & Access the UI button.
The Device UI login page displays.
5. Enter one of the following credentials:
•
Device admin password:
Enter the device admin password. The default device
admin password is password. The first time that you enter the default device admin
password, the Change Default Password page displays, requiring you to customize
the device admin password.
• Insight network password: If
you previously logged in to the device UI, you changed
the management mode to NETGEAR Insight, and you added the switch to an Insight
network location, enter the Insight network password to access the device UI. (In such
a situation, the Insight network password replaces the switch device admin
password.)
6. Click the Go
button.
7. If the Change Default Password page displays, specify and confirm a new device admin
password,
click the Submit button, and log in again with your new password.
The System Information page displays. You can now configure the switch.
8. Select Maintenance >
Registration Key.
The Registration Key page displays.
9. In the field, type or paste the registration key.
10. Click the Submit
button.
The registration takes effect on the switch and you are no longer prompted to activate
your warranty when you log in.
Change the language of the device UI
By default, the language is set to Auto. You can set the language to a specific one.
To change the language of the device UI:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.