User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual334
The System Information page displays.
6. Select Security >
ACL > Advanced > IPv6 ACL.
The IPv6 Configuration page displays.
7. Select the check box that is associated with the IPv6 ACL.
8. Click the Delete
button.
The IPv6 ACL is removed.
Configure rules for an IPv6 ACL
You can define rules for IPv6 ACLs. The access list definition includes rules that specify
whether traffic matching the criteria is forwarded normally or discarded.
Add a rule for an IPv6 ACL
Add a rule for an ACL IPv6:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Security >
ACL > Advanced > IPv6 Rules.