User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual321
• Match Every. Select one of the radio buttons to specify whether all packets must
match the selected IP ACL rule:
- Enable. All
packets must match the selected IP ACL rule and are either permitted
or denied.
- Disable. Not all packets need to match the selected IP ACL rule.
•
Interface. Select one of the radio buttons to specify whether all packets must be
mirrored or redirected:
- Mirror.
From
the menu, select the specific egress interface to which the matching
traffic stream must be copied, in addition to being forwarded normally by the
switch.
- Redirect. From
the menu, select the egress interface to which the matching traffic
stream must be redirected, bypassing any forwarding decision normally
performed by the switch.
• Source IP Address. Enter an IP address using dotted-decimal notation to be
compared to a packet’
s source IP address as a match criterion f
or the selected IP
ACL rule.
• Source IP Mask. Specify the IP mask in dotted-decimal notation to be used with the
source IP address value.
10. Click the Apply
button.
Your settings are saved.
Modify the match criteria for a basic IPv4 ACL rule
To modify the match criteria for a basic IPv4 ACL rule:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.