User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual316
2. Create an IPv4 rule (see Configure rules for a basic IPv4 ACL on page 319 or
Configure rules for an extended IPv4 ACL on page 323).
3. Associate the IPv4 ACL
with one or more interfaces (see Configure IP ACL interface
bindings on page 341).
You can view or delete IPv4 ACL configurations in the IP ACL Binding table (see
View or
delete IP ACL bindings in the IP ACL binding table on page 343.
Add an IPv4 ACL
To add an IPv4 ACL:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Security > ACL
> Advanced > IP ACL.