User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual304
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Security > ACL
> ACL Wizard.
The ACL Wizard page displays.
7. Select check box that is associated with the rule.
8. Click the Delete
button.
The rule is removed.
ACL Wizard Example
In the following figure, the ACL rule is configured to check for packet matches on ports 8, 10,
11, and 13 and on LAG 1. Only the Inbound option is valid. Packets that include a source
address in the 192.168.3.0/16 network are forwarded by the interfaces. All other packets are
dropped because every ACL includes an implicit deny all rule as the last rule.