User Manual
Table Of Contents
- 24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management
- Contents
- 1 Get Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the device UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use a Windows-based computer to access the switch on-network and connected to the Internet
- Use the NETGEAR Insight mobile app to discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the switch when it is connected to the Internet
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network and connected to the Internet when you know the switch IP address
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- Use the Device View of the device UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define switch system information
- Configure the switch IP address settings
- Configure the IPv6 network interface
- Configure the time settings
- Configure Denial of Service settings
- Configure the DNS settings
- Configure Green Ethernet settings
- Manage switch discovery with UPnP and SSDP
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure DHCP snooping
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Quality of Service
- 5 Manage Device Security
- Change the device admin password for the device UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Manage the Smart Control Center
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 6 Monitor the System
- 7 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual29
Alternatively, you can obtain a registration key and enter the key when the switch is offline
so that you are no longer prompted to activate your warranty (see
Register the switch
with your NETGEAR account and get a registration key for offline access on page 31).
• Device admin password:
You can access the device UI with your device admin password.
The first time that you access the device UI, enter the default device admin password
(password),
after which
you are required to customize the password for greater security.
Subsequent times that you log in to the device UI, use your customized device admin
password.
• NETGEAR Insight network location password:
NETGEAR Insight can affect how you access the switch device UI. After you add the
switch to
an Insight network location and change the management mode of the switch so
that you can use the NETGEAR Insight app and Insight Cloud portal to manage the
switch remotely (see
Change the management mode of the switch on page 35), the
Insight network location password replaces the switch device admin password. To
access the device UI, you must enter the Insight network locati
on password.
Even if you temporarily change the management mode of the switch back to Direct
Connect Web Browser Interface, for example to change settings that are not
Insight-manageable or for debugging purposes, you must enter the Insight network
location password.
For information about how the Insight network password functions, visit
netgear.com/support/product/Insight.aspx. For knowledge base articles about
NETGEAR Insight, visit
netgear.com/support.
The following table lists the essential credential options for access to the device UI.
Table 3. Credentials for access to the device UI
Management mode in the
device UI
Added to an
Insight network
Credentials Device UI menu
Default mode:
Direct Connect Web Browser
Interface (Local LAN Only)
No Device admin password
Full device UI menu
Yes
1
1. This situation occurs if you temporarily change the management mode of the switch from NETGEAR Insight Mobile App and
Insight Cloud Portal back to Direct Connect Web Browser Interface.
Insight network password
NETGEAR Insight Mobile App
and Insight Cloud Portal
(Cloud/Remote)
No Device admin password Limited device UI menu.
Not managed through
NETGEAR Insight.
Yes Insight network password Limited device UI menu.
Managed through
NETGEAR Insight.