User Manual
Table Of Contents
- 24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management
- Contents
- 1 Get Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the device UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use a Windows-based computer to access the switch on-network and connected to the Internet
- Use the NETGEAR Insight mobile app to discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the switch when it is connected to the Internet
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network and connected to the Internet when you know the switch IP address
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- Use the Device View of the device UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define switch system information
- Configure the switch IP address settings
- Configure the IPv6 network interface
- Configure the time settings
- Configure Denial of Service settings
- Configure the DNS settings
- Configure Green Ethernet settings
- Manage switch discovery with UPnP and SSDP
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure LLDP
- Configure DHCP snooping
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure a voice VLAN
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Quality of Service
- 5 Manage Device Security
- Change the device admin password for the device UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Manage the Smart Control Center
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 6 Monitor the System
- 7 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual28
For more information, see Register the switch with your NETGEAR account and
get a registration key for offline access on page 31.
b. Click the Submit button.
• Do not register at this time and access the device UI: Do the following:
a. Click
the Skip
Registration & Access the UI button.
The Device UI login page displays.
b. Enter one of the following credentials:
-
Device admin password:
Enter the device admin password. The default
device admin password is password. The first time that you enter the default
device admin password, the Change Default Password page displays,
requiring you to customize the device admin password.
- Insight network password: If you previously logged in to the device UI, you
changed the management mode to NETGEAR Insight, and you added the
switch to an Insight network location, enter the Insight network password to
access the device UI. (In such a situation, the Insight network password
replaces the switch device admin password.)
For information about the credentials, see Credentials for the device UI on
page 28.
7. If the Change Default Password page displays, specify and confirm a new device admin
password, click the Submit button, and log in again with your new password.
The System Information page displays. You can now configure the switch.
8. After you complete the configuration of the switch, reconfigure the computer that you used
for
this process to its original TCP/IP settings.
You can now connect your switch to your network using an Ethernet cable.
Credentials for the device UI
The information in this section applies to accessing the switch device UI in either
management mode. That is, it does not apply to accessing the NETGEAR Insight app and
Cloud portal.
To access the device UI, and depending on your situation, use one of the following
credentials:
• NETGEAR account credentials
:
You can register the switch online to activate your warranty by entering your NETGEAR
account credentials (see
Register the switch with your NETGEAR account and access
the switch online on page 30). If you do not have a NETGEAR account, you can create
one.