User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual262
11. Click the Apply button.
Your settings are saved.
Configure HTTPS access settings
Secure HTTP (HTTPS) enables the transmission of HTTP over an encrypted Secure Sockets
Layer (SSL) or Transport Layer Security (TLS) connection. When you manage the switch
over the device UI, HTTPS can help ensure that communication between the management
system and the switch is protected from eavesdroppers and man-in-the-middle attacks. The
hash algorithms that SSL uses are MD5 and SHA-1.
To configure HTTPS access settings:
1. Connect
your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Security > Access
> HTTPS > HTTPS Configuration.
7. Select the Admin Mode Enable or Disable radio button.