User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual259
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Security >
Management Security > Authentication List > Dot1x Authentication
List.
The Dot1x Authentication List page displays.
7. Select the check box next to dot1xList.
8. From the menu in the 1 column, select the method that must be used first in the selected
authentication
login list.
The options are as follows:
• Radius. The user
’s ID and password are authenticated using the RADIUS server
instead of locally.
• None. The user is not authenticated.
9. Click the Apply
button.
Your settings are saved.
Manage the Smart Control Center
By default, the configuration option of the Smart Control Center (SCC) is disabled. You still
can use the SCC to discover the IP address of the switch, but you cannot use the SCC to
perform any actions on the switch. If you enable the configuration option of the SCC, you can
use it to configure the switch.
For more information about the SCC, visit
netgear.com/support/product/SCC.
Note: The device admin password is contained in many NETGEAR Switch
Discovery Protocol (NSDP) packet. Therefore, to increase the switch
security, the configuration option of the SCC is disabled by default.
To enable or disable the configuration option of the SCC:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.