User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual258
• RADIUS. The user’s ID and password are authenticated using the RADIUS server. If
you select RADIUS or Tacacs+ as the first method and an error occurs during the
authentication, the switch uses Method 2 to authenticate the user.
• Tacacs+. The user
’s ID and password are authenticated using the TACACS+ server.
If you select RADIUS or Tacacs+ as the first method and an error occurs during the
authentication, the switch attempts user authentication Method 2.
• None. The authentication method is unspecified, that is, no authentication is required.
9. From the menu in the 2 column, select the authentication method, if any, that must be used
second
in the selected authentication login list.
This is the method that is used if the first method times out. If you select a method that
does not time out as the second method, the third method is not tried.
10. From the menu in the 3 column, select the authentication method, if any, that must be used
third
in the selected authentication login list.
11. From the menu in the 4 column, select the method, if any, that must be used fourth in the
selected
authentication login list.
This is the method that is used if all previous methods time out.
12. Click the Apply
button.
Your settings are saved.
Configure the dot1x authentication list
The dot1x authentication list defines the IEEE 802.1X authentication method used for the
default list. The default list is dot1xList.
To configure the dot1x authentication list:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.