User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual244
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select Security > Management
Security > RADIUS > Server Configuration.
7. In the Server Address field, specify the IP address of the RADIUS server.
8. In the Authentication Port
field, specify the UDP port number that the server uses to verify
the RADIUS server authentication.
The range is from 1 to 65535. The default value is 1812.
9. From the Secret Configured
menu, select Yes.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS server
, this field indicates whether the shared secret for this server was
configured.
10. In the Secret
field, type the shared secret text string used for authenticating and encrypting
all RADIUS communications between the switch and the RADIUS server.
This secret must match the one that is configured on the RADIUS server.
11. From the Active
menu, select Primary.
12. From the Message Authenticator menu,
select Enable or Disable to specify whether the
message authenticator attribute for the selected server is enabled.
The message authenticator adds protection to RADIUS messages by using an
MD5 hash
to encrypt each message. The shared secret is used as the key, and if the message fails
to be verified by the RADIUS server, it is discarded.
13. Click the Add
button.
The server is added to the switch.
14. To reset the authentication server and RADIUS statistics to their default values, click the
Clear Counters
button.