User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual236
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 28.
5. Click the Go
button.
The System Information page displays.
6. Select QoS >
DiffServ > Advanced > Service Configuration.
The Service Interface Configuration page displays.
7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links
above the table heading:
•1 (the
unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
8. Select
the check box for the interface.
9. From the Policy
In Name menu, select another policy name.
10. Click the Apply
button.
Your settings are saved.
Remove a DiffServ policy from an interface
To remove a DiffServ policy from an interface:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 19 or Access the switch off-network and not
connected to the Internet on page 27.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 30.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 28.