User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual229
6. Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
7. Enter a policy name in the Policy Name
field.
You cannot specify the policy type. By default, the policy type is In, indicating that the
policy applies to ingress packets.
8. From the Member Class
menu, select an existing class that you want to associate with the
new policy.
9. Click the Add
button.
The new policy is added.
10. After creating the policy, click the policy name.
The policy name is a hyperlink to the page on which you can define the policy attributes.
11. Configure the policy attributes by selecting one of the following radio buttons:
• Assign Queue. Select this radio button to specify that traffic must be assigned to a
queue, which you must select from the menu. The queue is expres
sed as a value in
the range from 0 to 7.
• Drop. Select this radio button to require each inbound packet to be dropped.
• Mark VLAN CoS.
Select this
radio button to specify the VLAN priority, which you must
select from the menu. The VLAN priority is expressed as a value in the range from 0
to 7.