User Manual

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Quality of Service User Manual224
The IPv6 Class Name page displays.
7. Enter a class name in the Class Name
field.
The Class Name field also lists all the existing IPv6 class names, from which one can be
selected for modification or deletion.
8. From the Class T
ype menu, select the class type.
The switch supports only the class type value All, which means
that all the various match
criteria defined for the class are satisfied for a packet match. All signifies the logical AND
statement of all the match criteria. You can select the class type only when you are
creating a new class. After the class is created, the Class Type field becomes
nonconfigurable.
9. Click
the Add
button.
The new class is added.
10. After creating the class, click the class name.
The class name is a hyperlink to the page on which you can define the class
configuration.
11. Define the criteria that must be associated the IPv6 DiffServ class:
• Match Every. Select this radio button to add a match condition that considers all
packets to belong
to the class. The only selection from the Match Every menu is Any.